2-panel sliding door for alcoves
Inc.
|Silver high-gloss
|Article Number: XI101406265100
Warranty: 5 years
Mounting Type: Shower tray mounting, Floor mounting
Material: Aluminium
Width: 140 cm
Product Information
This two-panelled sliding door from the Inc. series shines in its simplicity. It is 120 cm wide and suitable for placement in a recess. The solid design and the high-gloss silver finish create a timeless, modern look. We like to see things through your eyes in terms of functionality. Thanks to the high-quality rollers, the sliding panel slides with ease. The soft-close system captures the movement and then closes the door gently. The profiles are also flat, and the glass is coated with an anti-limescale coating. Maintaining the shower enclosure is, therefore, no problem at all. Thanks to the high-quality design, you will enjoy your Inc. shower door for many years.
- Stylish and timeless: finished in silver high-gloss
- For added shower convenience: this door is no less than 2 metres high, so the heat remains in the shower longer
- For a clear glass wall: 8 mm tempered safety glass with anti-limescale coating
- Easy to clean: the sliding door can be detached for easy maintenance
- Easy installation: pre-assembled to the maximum extent and supplied with various installation tools
- Reversible: the door can be fitted on either the left or the right side
Specifications
| Width | 1400 mm |
| Depth | 37 mm |
| Height | 2000 mm |
| Weight | 77400 Gram |
| Colour | Silver high-gloss |
| Material | Aluminium |
| Mounting Type | Shower tray mounting, Floor mounting |
| Mounting Set Included | Yes |
| Article Number | XI101406265100 |
| EAN code | 8720314711912 |
What's in the package
- This product consists of two packages with
- All product components
- Installation tools, including screws and Fischer plugs & an Allen key
- Fitting instructions
Service & Warranty
5 years
Documentation
Tips:
Regular cleaning after showering gives the best protection against grime and limescale. This can be done satisfactorily by rinsing the glass surfaces and shower enclosure profile strips with warm water, followed by cold. Then dry the surfaces off using a squeegee. The shower room should have adequate ventilation during and after use. This prevents mould growing.